If the coating of the rollers is coming off it is pretty easy to see as the roller coating is missing from the rollers and is found throughout the back of the machine near the fusing assembly. You open the back door and the fusing assembly is right there. When I’ve seen this happen it has been pretty easy to troubleshoot. Also, customers will say the paper is wrinkled, indented, or embossed.ģ. When this happens you will get creases in the paper as it gets pressed together unevenly. Creased or wrinkled paper – Just like above, the outer coating of the rollers are coming apart. If any paper remains in this area remove it by slowly pulling it towards the front of the machine. Fix Jamming Errors after Replacing the Fuser To avoid paper jam errors, you must adjust the position of wires to allow smooth operation of the exit sensor. Carefully check the cavity where the paper tray was installed. On certain Brother Multifunction printers, following one additional step during fuser replacement can prevent your unit from reporting a false paper jam. Pull the paper tray completely out of the machine. If the outer coating is coming apart then you will have parts of the print that is not getting properly fused and will lead to blurred or smeared print.Ģ. How do I clear the Paper Jam message from my Brother machines display To clear a Paper Jam error, follow these steps: 1. Heat and pressure bond the toner to the paper in the fuser. This can lead to smeared or blurred print as the paper feeds through the fuser. Blurred or Smeared Print – The coating on the rollers have been falling apart on these fusing assemblies. Here a step by step troubleshoot guide with great graphics of your printer.īrother 9130, 9330, 9340 Smeared Print or Creased Paper Diagnostic Tipsġ. I would have to inspect the printer hardware to give my opinion on which part needs to be replace.

Paper jam on brother mfc 9330cdw